Product Description Saba PVC Pipe Glue S3 Solvent based, brushable PVC adhesive, available in 250ml, 1L and 6L. Saba S3 is a brushable solvent-based adhesive. Saba S3 is ideal for the bonding of all diameter PVC pipes in pressure situations and drain pipes and drinking water installations. Brush included in Tin. Method of Use; Clean the collar and pipe with Saba PVC & ABS Cleaner. The adhesive should be applied with a brush. Apply Saba S3 to the pipe and collar and mate the substrates immediately. When applying the adhesive to the pipe brush strokes should go up and down the length, and when applying to the collar they should go round the cylinder. You should use a higher volume of adhesive on the pipe and a smaller amount on the cylinder. Technical data; Viscosity at 23 C: approximately 1,300 mPa.s Density: approx 940 kg / m3 Solids content: about 27% Open time: about 3 minutes, depending on the ambient temperature Drying time: about 24 hours Consumption: 150 g / m2 per connection Clean with: Saba PVC & ABS Cleaner Processing temperature: Minimum + 5C – Storage Temperature: Minimum + 5C and maximum + 35C (frost sensitive) Temperature resistance: about -20C to about 95C Shelf life: 18 months in unopened container Pipe Size (Inch) Pipe Size (mm) Approx Joints per Litre ABS Approx Joints per Litre PVC 3/8″ -1″ 16mm-32mm 400 300 1 /14″ – 2″ 40mm-63mm 200 120 2 1/2″ – 4″ 75mm-110mm 70 50 5″ 125mm-140mm 20 150 6″ – 8″ 160mm-225mm 10 8